Description

The DH 5 flow heater was designed and built to be operated in mobile and stationary shower systems. The appliance can also be installed in special containers. In all modes of operation, the original chimney must be installed and care must be taken to ensure that the exhaust gas is evacuated to the outside. If the appliance is installed indoors or in a container, then ventilation must be provided such that the environmental temperature around the burner does not exceed +40 °C and the relative air humidity does not exceed 80 %.

The appliance is exclusively for the following areas of application: rapid heating of cold water with a temperature of 30 °C, a water flow between 500 and 1,800 l/h and a maximum temperature of 95 °C.

The appliance is equipped with a thermostatically controlled outlet for shower water and a hot water outlet for the consumption of hot water or for the operation of a heating device (hot water/air heat exchanger). The hot water is thermostatically controlled up to a temperature of 95 °C. To operate the appliance, fuel oil (EL) or diesel oil or kerosene can be used.